Differences

This shows you the differences between two versions of the page.

--- master:adjusting_slot_allocation [2021/12/06 23:05] – Scott Cunliffe
+++ master:adjusting_slot_allocation [2025/01/21 22:07] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
 ====== Adjusting Slot Allocation ======
-From time to time you may need to adjust a [[object:customer|Customers]] [[concepts:slot|Slot]] allocation based on increased or decreased [[object:volume|Volume]] numbers.
+This page has been relocated to the Technotes Section
-===== Increasing Slot Allocation =====
+See [[technote:adjusting_slot_allocation|Adjusting Slot Allocation]]
-Slotting allocation can be increased by either adding extra [[master:repository_assign_zone|zones]] to the [[object:repository|Repository]], or by increasing the [[concepts:slot|Slot]] allocation within the currently assigned [[master:repository_assign_zone|zones]].
-===== Decreasing Slot Allocation =====
-==== Removing Empty Slots ====
-Decreasing [[concepts:slot|Slot]] allocation for a [[object:customer|Customer]] can be as simple as reducing the [[concepts:slot|Slots]] allocated through the [[concepts:slot|Slot]] **Edit Range Information** window, as long as the [[concepts:slot|Slots]] being removed are sequential and unoccupied.
-==== Removing Occupied Slots ====
-If the [[concepts:slot|Slots]] to be removed from allocation are currently occupied, completely or partially, the [[object:volume|Volumes]] will need to be reslotted before this can be accomplished.
-<note important>You must have enough empty [[concepts:slot|Slots]] under the highwater mark to accommodate any [[object:volume|Volumes]] currently slotted above the mark.</note>
-To remove these [[object:volume|Volumes]] from the occupied [[concepts:slot|Slots]]:
-  * Right click the required [[object:repository|Repository]] and select ''Properties'', or double click the [[object:repository|Repository]] , and click on the ''Options'' tab.
-{{tapemaster_repository_properties.png}}
-  * Set ''Highwater Offset'' to the number you wish to lower [[concepts:slot|Slot]] allocation by.  For example if you currently have 3000 [[concepts:slot|Slots]] allocated and wish to reduce the allocation to 1000 [[concepts:slot|Slots]] set the highwater offset to 2000 (3000 - 2000).
-{{tapemaster_repository_options_highwater.png}}
-  * Run the slotting program [[:cli:tmss10slotallocation|TMSS10SlotAllocation]] to re-slot any [[object:volume|Volumes]] above the highwater mark.
-  * Decrease the [[:master:repository_assign_zone|slot allocation]].
-{{tapemaster_slot_range.png}}
-  * Adjust the **Highwater Offset** back to zero to enable use of all allocated [[concepts:slot|Slots]].
-{{tapemaster_repository_options_highwater_zero.png}}