TMSS10ExpireByDate

TMSS10ExpireByDate

TMS10ExpirebyDate searches the Volumes and adds a Move Pending Flag (p) to all Volumes that match the Volume and Date Range filters.

Synopsis

TMSS10ExpireByDate [-O Expiry Date Range Offset File] [-R Expiry Date Range] [-S logonstring] [-V volumefilter] [-c Configuration File] [-f Force Expiry] [-r Repository Filter] [-t Test Mode]

Options

TMSS10ExpireByDate command options:

-O Expiry date range offset file location
-R Expiry date range
-S Logon string argument sets the Server Logon Information.
-V Volume Filter which can be used to filter the traversal of Customer, Media, Volume, Repository and Flag values.
-c The config file argument specifies the path to the Batch Configuration File. The Batch Configuration File allows you to perform advanced traversal of Customer, Media and Volumes, perform advanced Barcode pre and post processing and route the program output to syslogd.
-f Forces expiry
-r Target Repository
-t Test mode, true performs task without applying updates

If an argument value starts with the value FI:, the value for that attribute will be read from the file name specified immediately after it. For example, if a file named ACME_volumes has the content ACME_*.*, specifying FI:/etc/ACME_volumes will have the same effect as -V ACME.*.*. Using FI: to refer to a file for an attribute value works for all attributes.

If the pattern being matched starts with *LIST: then rather than matching the literal value, each record in the file specified as *LIST:filename will be tested. If one matches the match will succeed.

Notes

Technical Support

The TapeTrack Software is commercially supported by a full time help desk staff.

If you are experiencing problems or want some advice on how to configure or use the product please see the Accessing Technical Support page

Exit Status

zero Program has ended successfully.
non-zero Program has not ended successfully.

Environment

TMSSSERVERPROXY If defined the program will route all TapeTrack TCP/IP traffic through a HTTPS proxy. The value of the variable should be in the format user:password@host:port. To debug the proxy connection use variable TMSSAPILOGDIR.

TMSSAPILOGDIR If defined the program will write out a trace file to this directory.

TMSSPWPATH When no password value is passed in the logon string the program will look for the password in file C:/tapetrack/pw/batch, where user is the user value passed in the logonstring. If you wish to change this default path, you can set the path in TMSSPWPATH.

TMSSNOMD5 If defined the program will not MD5 hash passwords before sending them to the TapeTrack Server. This is required when relying on Windows Active Directory authentication. It should be noted that although the password is not being hashed, it is still encrypted during transmission.

Examples

Command Line Syntax

TMSS10ExpireByDate -S username:-password@localhost -V "US01.*.*" -R "*-5:*"

Output

C:\WINDOWS\system32>TMSS10ExpireByDate -S username:-password@localhost -V "US01.*.*" -R "*-5:*"
ZBT001N-19:41:07 TMSS10ExpireByDate (c) GazillaByte 1998-2017
ZBT002N-19:41:07 Compiled Jul 28 2017 at 09:52:50
ZBT010I-19:41:07 This program adds a 'Move Pending flag' to Volumes which have a 'Next Move Date' within the 
specified range
ZBT006N-19:41:07 Running Under Windows 10 (build 15063 10.00) on platform x64
ZBT000N-19:41:07 Host is Little Endian
ZBT000N-19:41:07 Host is ASCII
ZBT000N-19:41:07 Binary is 64 bit
ZBT000N-19:41:07 Current Working Directory is C:\WINDOWS\system32
ZBT004N-19:41:07 Today is Wednesday, September 20, 2017
ZBT005N-19:41:07 Running on GazillaByte
ZBT006N-19:41:07 Process ID 20036
ZBT000N-19:41:07 Parsing and validating command arguments
ZBT001N-19:41:07 Server Interpreted as: Server(localhost) Port(5000) User(username) Password(******)
ZBT000N-19:41:07 Explicit date range requested as: *-5:*
ZBT000N-19:41:07 Start date interpreted as: Friday, September 15, 2017
ZBT000N-19:41:07 End date interpreted as: Wednesday, September 20, 2017
ZBT000N-19:41:07 Days apart: 6
ZT000N-19:41:07 Checking for Environment Variable 'ESPDATERANGEOFFSETFILE'
ZBT002N-19:41:07 Program Options:
ZBT002N-19:41:07        (O) Expiry Date Range Offset File=
ZBT002N-19:41:07        (R) Expiry Date Range=*-5:*
ZBT002N-19:41:07        (S) Server=<VALUE HIDDEN>
ZBT002N-19:41:07        (V) Volume Filter=US01.*.*
ZBT002N-19:41:07        (c) Configuration File=
ZBT002N-19:41:07        (f) Force Expiry=false
ZBT002N-19:41:07        (r) Repository Filter=*
ZBT002N-19:41:07        (t) Test Mode (no updates)=false
ZBT000N-19:41:07 Arguments parsed and validated with 0 errors
ZBT000N-19:41:07 Checking for environment variable TMSSSERVERPROXY
ZBT000N-19:41:07 Connection to server (127.0.0.1) successful
ZBT000N-19:41:07 Logging on to TapeTrack Server
ZBT000N-19:41:07 Registering Client at MACID(00:8c:fa:8e:02:f5:00:00) Result(Request OK)
ZBT000N-19:41:07 Last Logon was at Wednesday, September 20, 2017 - 19:40:38 from 127.0.0.1 (Laptop_Senior)
ZBT000N-19:41:07 Welcome to Server: Production

           System: TapeTrack
 Report Description: Volume Expiry Report
     Report Notes: Volumes expiring between 2017-09-15 and 2017-09-20
  Production Time: Wednesday, September 20, 2017 - 19:41:07 (AUS Eastern Standard Time)
     Report Width: 153 bytes

 Seq.   Customer             Media                Barcode              Next Move                      Result            
 ------ -------------------- -------------------- -------------------- ------------------------------ --------------------------------------------------
ZBT001N-19:41:07 Volume filter interpreted as: Customer(US01) Media(*) Volume(*) Repository(*) Flags()
ZBT000N-19:41:07 Listing Customers
ZBT000N-19:41:07 Customer List successful: Customers(7) Excluded(0)
ZBT000N-19:41:07 Processing Customer: US01-New York Data Center (2287/730)
ZBT000N-19:41:07 Listing Media
ZBT000N-19:41:07 Media List successful: Media(3) Excluded(0)
ZBT000N-19:41:07 Processing Media: 359X-IBM 359x Cartridge
ZBT000N-19:41:07 Listing Volumes
ZBT000N-19:41:07 Volume List successful: Volumes(0) Excluded(2069)
ZBT000N-19:41:07 Processing Media: CONT-Media Containers
ZBT000N-19:41:07 Listing Volumes
ZBT000N-19:41:07 Volume List successful: Volumes(0) Excluded(5)
ZBT000N-19:41:07 Processing Media: LTO-LTO Cartridge
ZBT000N-19:41:07 Listing Volumes
ZBT000N-19:41:07 Volume List successful: Volumes(28) Excluded(185)
ZBT000N-19:41:07 Volume 000003L6 has Move Date of Tuesday, September 19, 2017
    1 New York Data Center LTO Cartridge        US01.LTO.000003L6    Tuesday, September 19, 2017     Request OK       
ZBT000N-19:41:07 Volume 000004L6 has Move Date of Tuesday, September 19, 2017
    2 New York Data Center LTO Cartridge        US01.LTO.000004L6    Tuesday, September 19, 2017     Request OK       
ZBT000N-19:41:07 Volume 000005L6 has Move Date of Tuesday, September 19, 2017
    3 New York Data Center LTO Cartridge        US01.LTO.000005L6    Tuesday, September 19, 2017     Request OK       
ZBT000N-19:41:08 Volume 000006L6 has Move Date of Tuesday, September 19, 2017
    4 New York Data Center LTO Cartridge        US01.LTO.000006L6    Tuesday, September 19, 2017     Request OK       
ZBT000N-19:41:08 Volume 000007L6 has Move Date of Tuesday, September 19, 2017
    5 New York Data Center LTO Cartridge        US01.LTO.000007L6    Tuesday, September 19, 2017     Request OK       
ZBT000N-19:41:08 Volume 000008L6 has Move Date of Tuesday, September 19, 2017
    6 New York Data Center LTO Cartridge        US01.LTO.000008L6    Tuesday, September 19, 2017     Request OK       
ZBT000N-19:41:08 Volume 000009L6 has Move Date of Tuesday, September 19, 2017
    7 New York Data Center LTO Cartridge        US01.LTO.000009L6    Tuesday, September 19, 2017     Request OK       
ZBT000N-19:41:08 Volume 000010L6 has Move Date of Tuesday, September 19, 2017
    8 New York Data Center LTO Cartridge        US01.LTO.000010L6    Tuesday, September 19, 2017     Request OK       
ZBT000N-19:41:08 Volume 000011L6 has Move Date of Tuesday, September 19, 2017
    9 New York Data Center LTO Cartridge        US01.LTO.000011L6    Tuesday, September 19, 2017     Request OK       
ZBT000N-19:41:08 Volume 000012L6 has Move Date of Tuesday, September 19, 2017
   10 New York Data Center LTO Cartridge        US01.LTO.000012L6    Tuesday, September 19, 2017     Request OK          
ZBT000N-19:41:08 Volume AI0003 has Move Date of Friday, January 01, 2038
ZBT000N-19:41:08 Volume AI0004 has Move Date of Friday, January 01, 2038
 ------ -------------------- -------------------- -------------------- ------------------------------ -------------------------------------------------
ZBT000N-19:41:08 Closing connection to TapeTrack Server
ZBT000N-19:41:08 Session Statistics:
ZBT000N-19:41:08        Seconds Connected: 1
ZBT000N-19:41:08        Queries Completed: 34
ZBT000N-19:41:08               Bytes Sent: 3,544
ZBT000N-19:41:08           Bytes Received: 5,144
ZBT900N-19:41:08 Program Complete
ZBT901N-19:41:08 Elapsed time 0 minutes and 1 seconds
ZBT991N-19:41:08 CRC values for this session: 0xe7588cf9 (0x281f0d58)
ZBT992N-19:41:08 Number of records written: 85
ZBT993N-19:41:08 Number of bytes written: 5,258
ZBT999N-19:41:08 Program ended

Changelog

2021-05-24	Fixed bug when using TMSSLEVELNAME and TMSSNOLEVELSLOT variables (#127)
2020-11-24	Added support for JSON output
2019-02-25	Added support for HTML output
2019-02-09	Added support for Excel output
2019-01-06	Added return code list to end of all command line programs that use the TapeTrack API
2016-11-18	Added fast forward code to reduce runtime
2016-11-18	Enhanced argument parser to allow arguments in format *FI:filename that allows loading of arguments from a file
2015-12-26	Added flags to Volume Filter syntax (customer.media.volume@repository+flags)
2015-08-24	Changed hascontents to contentcount and change contentcount to a filter rather than bool
2015-08-24	Added iscontainer and hascontents to the config file filter logic
2015-05-16	Added environmental varialbe TMSSCANFILEUNQUALIFIED which will load and check volumes without Customer-ID and Media-ID qualifiers
2015-05-16	Added environmental varialbe TMSSSCANFILENOPARSE which will presume scanfile items are only Volumes and not parse them, saving time
2015-05-16	When loading scanfile from import definition, added CUSTOMER and MEDIA keywords to set defaults
2015-05-16	When loading scanfile from import definition, changed keyword from VOLUME to BARCODE
2015-05-16	Added TMSSUNQUALIFIEDVOLUME environmental variable which forces all barcodes to be printed without Customer-ID and Media-ID
2015-05-04	Added support for AD passwords to all command line programs (check for environmental variable TMSSNOMD5)
2014-11-19	Changed server argument parser to allow colon in password to support z/OS DD name files
2014-10-26	Upgraded development environment from Visual Studio 2012 to Visual Studio 2013

Table of Contents