Check the status of the TapeTrack Framework Server by running the following commands (operating system dependant) directly from the server the TapeTrack is installed on.
From a command prompt run:
sc query "TMSS10SVC"
Service is running.
SERVICE_NAME: TMSS10SVC
TYPE : 10 WIN32_OWN_PROCESS
STATE : 4 RUNNING
(STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
Service is not running.
SERVICE_NAME: TMSS10SVC
TYPE : 10 WIN32_OWN_PROCESS
STATE : 1 STOPPED
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
If the Framework Server is not running, attempt to start the Framework Server and then check your connection again.
If the Framework Server wont start see Rebuild Database Environment Files.
If the Framework Server still wont start see Reloading Server
From a command prompt run:
systemctl list-units --type=service
Look through the output to find the tapetrack.service and the status next to it.
Service is running
tapetrack.service loaded active running SYSV: TapeTrack server daemon
Service is not running
tapetrack.service loaded failed failed SYSV: TapeTrack server daemon
If the Framework Server is not running, attempt to start the Framework Server and then check your connection again.
If the TapeTrack Framework Server is running, use TMSS10Ping to check the connection to the server.
Ping the TapeTrack Framework Server with TMSS10Ping, using localhost on the server that TapeTrack Framework Server is installed on with:
C:\WINDOWS\system32>TMSS10Ping localhost
Successful connection will return packets and display as shown below.
44 bytes from 127.0.0.1: seq=1 time=6.00 ms 44 bytes from 127.0.0.1: seq=2 time=0.00 ms 44 bytes from 127.0.0.1: seq=3 time=0.00 ms 44 bytes from 127.0.0.1: seq=4 time=0.00 ms --- localhost TMSS10Ping statistics --- 4 packets transmitted round-trip min/avg/max = 0.00/1.50/6.00 ms
Unsuccessful connection returns
TMSS10Ping: Connect to TapeTrack Server failed: WSAError(10061)
An unsuccessful connection from the computer TapeTrack Framework Server is installed on (localhost), while the TapeTrack Framework Server is running, suggests a port problem and should be referred to your network department to remedy the problem.
A successful connection from localhost but not from client computers suggests a firewall issue not letting TapeTrack communications through and should be referred to your network department to remedy the problem.
netstat -abn | more ... [svchost.exe] TCP 0.0.0.0:5000 0.0.0.0:0 LISTENING [TMSS10Server.exe] ...
In this case:
1. The service was running.
2. TMSS10Ping was blocking (hanging).
3. TapeTrack was on port 5000, which means it was up and listening.
This is most definitely a Firewall problem.
If you do not have access to change the Windows Firewall rules check with your Windows Admin team.