TapeTrack Documentation

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Remove Slot Level Display In TapeMaster ======

===== Modify the TapeMaster Configuration File =====

Locate the TapeMaster Configuration file (default location C:\Program Files\TapeTrack\TapeTrack TapeMaster\TMSSMaster.cfg) and open with Notepad or other plain text editor.

Locate the section **variables**

{{technote:technote_tmss10masterconfig_find_variables.png}}

Remove comment tags /* & */ from above and below variables.

Change the line of code \\
TMSSLEVELNAMES = “A,B,C”; \\
to \\
TMSSNOLEVELSLOT = “true”; \\

{{technote:technote_tmss10masterconfig_tmssnolevelslot.png}}

and save file.

<note important>Make sure that you have sufficient rights to save file to directory and to save as TMSS10Master.cfg 
 and not as a text file or other file extension.</note>


To check the modification was successful:

Login to TapeMaster and open slotted media to check display of volume location is now restricted to Zone and shelf as illustrated by the images below.

Before modification - TapeMaster displaying Zone, shelf and slot.

{{primer:primer_physical_slot_3.png}}

After modification - TapeMaster displaying Zone and shelf only.

{{technote:technote_no_slot_display.png}}

<note important>If when opening TapeTrack TapeMaster you receive an error - **Failed to read configuration file (TMSSMaster.cfg): Line( ) - Syntax error** check the configuration file that you have used plain ASCII quotes (" ") and not rich text quotes (“ ”) and that the replaced text is correct.</note>

{{tag>technote config slotting tapemaster_slot update-doco}}