Differences

This shows you the differences between two versions of the page.

--- technote:sharing_containers [2021/09/07 00:08] – Scott Cunliffe
+++ technote:sharing_containers [2025/01/21 22:07] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
-====== Sharing Containers Between Customers ======
+====== Sharing Containers Between Customers With Lite Scan-Out======
-If you have two or more Customer-ID's (own their own Volumes) that vault their Volumes at each other sites but share use and custody of the containers, it may be beneficial to set up an extra Customer-ID as the owner of the Volume containers.  This allows joint management of the containers, allowing either Customer to select containers either at the onsite and offsite location.
+If you have two or more Customer-ID's (own their own Volumes) that vault their Volumes at each other sites but share use and custody of the containers, it may be beneficial to set up an extra Customer-ID as the owner of the Volume containers.  This allows joint management of the containers, allowing either Customer to select containers both at their onsite and offsite location.
+<note>This feature in Lite is available for releases with a compile date of 2021/09/15 or later.</note>
 =====  Scope =====
@@ Line 15: / Line 16: @@
 ===== TapeTrack Setup =====
-Customer GZNY:
+Customer GazillaByte New York:
   * Customer-ID: GZNY
   * Media-ID:  LTO
@@ Line 22: / Line 23: @@
     * OFFS (GZNC Vault)
-Customer GZNC:
+Customer GazillaByte North Carolina:
   * Customer-ID: GZNC
   * Media-ID:  LTO
@@ Line 29: / Line 30: @@
     * OFFS (GZNY Vault)
-Customer CASE:
+Customer Media Cases:
   * Customer-ID: CASE
   * Media-ID:  BOX
@@ Line 36: / Line 37: @@
     * NYB (New York Box)
-===== Lite Configuration Alterations =====
+===== Lite Configuration File =====
+Open the file ''TMSSLite.cfg'' (default location C:\Program Files\TapeTrack\TapeTrack Lite\TMSSLite.cfg) in a plain text editor, such as Notepad.
+Locate the section on Repository Aliases,
+<code>
+//*
+//* When using Send you might need to pickup Containers that have different Repository-ID setups.
+//*
+repository=
+{
+   aliases=
+   (
+        { subject="ACME.*.LIBR"; alias="CASE.BOX.NYC"; }
+   );
+}
+</code>
+If you upgraded from an earlier release of Lite without removing (or renaming) the file ''TMSSLite.cfg'', you may not find this section of code, this is because when Lite is uninstalled the configuration file is not removed.  The reason behind this is to stop you losing any customisations you may have previously made to your installation.
+If this is the case copy and paste the above code into the end of your configuration file starting with a clean line.
+==== Translations ====
+The Repository translations are written in the format of
+  * subject: Volume Repository
+    * =translation: Customer-ID.All_Media-ID.Repository-ID
+  * alias: Case Repository
+    * =translation: Customer-ID.All_Media-ID.Repository-ID
+For Customer GZNY we want to map the:
+  * Onsite Repository (GZNY Library (GZNY.*.NYLB)) to the NYB Repository (New York Box (CASE.BOX.NYB))
+  * Offsite Repository (GZNC Vault (GZNY.*.OFFS)) to the NYC Repository (North Carolina Box (CASE.BOX.NCB))
+For Customer GZNC we want to map the:
+  * Onsite Repository (GZNC Library (GZNC.*.NCLB)) to the NYC Repository (North Carolina Box (CASE.BOX.NCB))
+  * Offsite Repository (GZNY Vault (GZNC.*.OFFS)) to the NYB Repository (New York Box (CASE.BOX.NYB))
+<code>
+//*
+//* When using Send you might need to pickup Containers that have different Repository-ID setups.
+//*
+repository=
+{
+   aliases=
+   (
+          { subject="GZNY.*.NYLB"; alias="CASE.BOX.NYB"; },
+          { subject="GZNY.*.OFFS"; alias="CASE.BOX.NCB"; },
+          { subject="GZNC.*.NCLB"; alias="CASE.BOX.NCB"; },
+          { subject="GZNC.*.OFFS"; alias="CASE.BOX.NYB"; }
+   );
+}
+</code>
+==== Save Alterations ====
+Once all translations have been created, save the configuration file ensuring that it is saved as ''TMSSLite.cfg'' and not as a text file.
+You may need to alter the files' security settings or elevate your access rights to save the file correctly.
+==== Confirming Alterations ====
+Open Lite and login to ensure there are no errors in the file ''TMSSLite.cfg''.
+If you have Volumes in a move status out of one of the Repositories used in the translations (eg NYLB) and cases available at the corresponding Repository (eg NYC) it is possible to check your alterations without proceeding to the point of scanning out the Volumes by exiting Lite (Closing Lite) at the ''Scan-Out Container Selection'' window.  Do not proceed past this window if you do not want to make any alterations to the database and actually Scan-Out the Volumes.
+{{check_container_translation_short.gif}}
+{{tag> technote lite container config}}