Differences

This shows you the differences between two versions of the page.

--- technote:adjusting_slot_allocation [2021/12/07 00:56] – Scott Cunliffe
+++ technote:adjusting_slot_allocation [2025/01/21 22:07] (current) – external edit 127.0.0.1
@@ Line 24: / Line 24: @@
 <note important>You must have enough empty [[concepts:slot|Slots]] under the highwater mark to accommodate any [[object:volume|Volumes]] currently slotted above the mark.</note>
-To remove these [[object:volume|Volumes]] from the occupied [[concepts:slot|Slots]]:
+To remove these [[object:volume|Volumes]] from the occupied [[concepts:slot|Slots]], right click the required [[object:repository|Repository]] and select ''Properties'', or double click the [[object:repository|Repository]] , and click on the ''Options'' tab.
-  * Right click the required [[object:repository|Repository]] and select ''Properties'', or double click the [[object:repository|Repository]] , and click on the ''Options'' tab.
 {{select_repository_properties.gif}}
@@ Line 41: / Line 40: @@
 {{refresh_slots.gif}}
-Right click the required [[object:repository|Repository]] and select ''Properties'', or double click the [[object:repository|Repository]] , and click on the ''Zones'' tab.
+Right click the required [[object:repository|Repository]] and select ''Properties'', or double click the [[object:repository|Repository]] , and select the ''Options'' tab.
+Adjust the **Highwater Offset** back to zero to enable use of all allocated [[concepts:slot|Slots]] and click ''Save'' to update the information.  This is important to do before adjusting the Slot allocation on the Zone. If you have TMSS10SlotAllocation scheduled at close intervals, otherwise the next time Slotting runs it will adjust the Volumes below the Highwater offset again.  In this example it would try to lower Volumes to Slots 1 to 20 (eg 60 Slots - the 40 Highwater Offset)
-Double click on the required Zone to open the ''Edit Range Information'' window.
+{{set_highwater_value_0.gif}}
+Right click the required [[object:repository|Repository]] and select ''Properties'', or double click the [[object:repository|Repository]] , and select the ''Zones'' tab.
+Right click on the Zone Index and select ''Properties'' (or double click) on the required Zone to open the ''Edit Range Information'' window.
+{{open_zone_properties.gif}}
 Using the slider adjust the Slot allocation (or enter number in the ''Allocation:End'' field) to the desired Slot number to decrease the [[:master:repository_assign_zone|slot allocation]].
@@ Line 50: / Line 56: @@
 {{lower_slot_allocation_slider.gif}}
-  * Adjust the **Highwater Offset** back to zero to enable use of all allocated [[concepts:slot|Slots]].
+Click ''OK'' on the ''Edit Range Information'' window to close once the correct Slot allocation data is entered.
+Click ''Save'' on the '"Edit Repository'' window to commit the new Slot allocation data.
-{{tapemaster_repository_options_highwater_zero.png}}
+{{tag> technote slotting zone tapemaster}}